AddArc Function

Adds an arc to the current page.

Syntax

GraphicID = Doc.AddArc(AngleStart, AngleEnd, CenterX, CenterY, RadiusX, RadiusY [, Filled])

Params

Name	Type	Description
AngleStart	Float	The start angle of the arc in degrees.
AngleEnd	Float	The end angle of the arc in degrees.
CenterX	Float	The horizontal center of the arc.
CenterY	Float	The vertical center of the arc.
RadiusX	Float	The horizontal radius of the arc.
RadiusY	Float	The vertical radius of the arc.
GraphicID	Long	The Object ID of the newly added Graphic Object.
Filled	Boolean	Whether to fill the arc rather than simply drawing it (optional).

Notes

Adds an arc to the current page. The arc is drawn in the current color at the current width and with the current options.

The arc is fixed at the center coordinate and can have different horizontal and vertical radii. Drawing starts at the start angle and the arc is swept out until the end angle is reached. Angles are measured anti-clockwise with zero at three o'clock.

The AddArc function returns the Object ID of the newly added Graphic Object.

Example

The following code adds an arc to a document.

Set theDoc = Server.CreateObject("ABCpdf6.Doc") theDoc.Width = 24 theDoc.Color = "120 0 0" theDoc.AddArc 0, 270, 300, 400, 200, 300 theDoc.Save "c:\mypdfs\docaddarc.pdf"

docaddarc.pdf